MIZUTANI SCISSORS official site SWIVEL S-01 page.

MIZUTANI

MENU

SWIVEL S-01

A pair of scissors with rotating finger holes that prevent tendonitis. They smoothly follow the movement of your thumb, to keep hand damage to a minimum.

Size : 5.7INCH 6.2INCH
Use : BLUNT
Material : Extramarise II Cobalt Alloy
5.7INCHBlade length : 56.9mm
[Bottom blade] Ring size：horizontally/18.5mm・vertically/19.5mm
[Top blade] Ring size：horizontally/17mm・vertically/19mm
Product number : #102170
6.2INCHBlade length : 64.8mm
[Bottom blade] Ring size：horizontally/18.5mm・vertically/19.5mm
[Top blade] Ring size：horizontally/17mm・vertically/19mm
Product number : #102171
World Network

Release the thumb from restrictions.

Why the scissors thumb ring has not been rotated before? Our theme is“easy-to-use scissors”The one of answer is to turn the thumb ring “to release the thumb from restrictions” The thumb ring swivels through 360 degrees in various cut ways to reduce the burden on your hand. Moreover, the degree of freedom offered by mounting two ball bearings. It becomes prevention of wrist/carpal tunnel issues because it does not give you the difficult motion to your hand.
3 ring sizes (L size is regular size.)
(S・15.5mmx16.5mm/M・17mmx17.5mm/L・18.5mmx19.5mm)
handle cross section
EXTRAMARISE
EXTRAMARISE
EXTRAMARISE® is a proprietary heat treatment ideally suited for haircutting scissors that was developed by MIZUTANI based on long years of accumulated data and experience. The same steel material can have totally different performance depending on the heat treatment used. Therefore, to maximize the special qualities of the rare metals (cobalt, molybdenum, vanadium, etc.) we’ve added to our products to the greatest extent possible, and achieve the ideal metal for scissors, (*hardening, tempering, sub-zero processing) and other complete temperature management procedures are essential. To bring out the distinct characteristics of materials, and manufacture a blade with the ultimate strength required for haircutting scissors, we at MIZUTANI have implemented our own proprietary heat treatment using the ideal temperature for scissors: EXTRAMARISE® processing.
CARBON RESIN BEARING
CARBON RESIN BEARING
The bearings made of carbon-contained resin is used that is excellent in friction and abrasion, and several pieces are mounted inside the pivot screw, to produce the even and smooth feelings in opening and closing the blades.
RESIN BEARING
RESIN BEARING
These bearings are made by shaving each of them one by one, using a resin material with excellent mechanical properties. Their smoothness and flexibility makes for an ideal cutting experience, and protects the scissors and screws from wear and tear. Our bearings are gentle to both our scissors and their users.
ORGANIC DESIGN
ORGANIC DESIGN
The handles are so designed that they look nonmetallic, alive and organic. You may feel some warmth from the three-dimensional, twisted handles, and once touched, you would not like to part them from your hand.
DISK DRIVER
DISK DRIVER
Compact and easy to turn, this is a flat type driver for UFO screws. This screwdriver is included with all scissors with the mark shown.
* trademark of MIZUTANI SCISSORS is registered trademark of MIZUTANI SCISSORS in Japan.
* SWIVEL® is registered trademark of MIZUTANI SCISSORS in Japan.
* SWIVEL® series is registered design patent in Japan.
PAGE TOP