Products
NEW PRODUCTS- 2024 ENGRAVING MODEL
- CROSSOVER GANYMEDE
- SERENITE
- NEW BEAK
- CROSSOVER STEALTH
- CROSSOVER THINNING
- BRUTALIST
FEATURED PRODUCTSCUT SCISSORSTHINNING SCISSORSOTHERSSERIES
360ºMIZUTANI
NEWSMOYO ShowroomSUPPORT
ELEMENT THINNING
The shape of the comb is suited to men’s hairstyles and enables everything from volume adjustments to creating the texture on the top an and blending the hair. The short blades can move accurately along the curve of the head.
Cut ratio : 25~30%
Use : TEXTURE~VOLUME 15~25%
Material : Extramarise II Cobalt Alloy
25~30%Blade length : 58mm
[Bottom blade] Ring size : horizontally/18mm・vertically/21.5mm
[Top blade] Ring size : horizontally/18mm・vertically/21.5mm
Product number : #104613
[Top blade] Ring size : horizontally/18mm・vertically/21.5mm
Product number : #104613
ELEMENT THINNING -English-
Pursuing precision for men's haircuts!
ELEMENT Ver.2 with new blade design.
ELEMENT Ver.2 with new blade design.
Secret of the thinning, “Three-dimensional effect” for men’s haircuts.
In order to pursue a style with a “three-dimensional effect” that Mr. Nishimori is particular about, the tip shape of the comb blade has been redesigned to make it more smoothly to pull out and create the desired texture.
「MEN’S CUT BIBLE 1」「MEM’S CUT BIBLE 2-3」
1) For the owners having difficulty training the staffs!
2) For the hairstylists not good at about Men’s haircuts!
3) For those who hate and stay away from special techniques such as fade cuts because they are difficult!
2) For the hairstylists not good at about Men’s haircuts!
3) For those who hate and stay away from special techniques such as fade cuts because they are difficult!
Tomoya Nishimori
MR.BROTHERS CUT CLUB was opened their 1st shop in Harajuku, Tokyo, 2015. Now, they have expanded their shops, another 2 in Tokyo (Nakameguro and Harajuku Annex), 2 in Osaka (Minami Horie and Nakazaki-cho), 1 in L.A. and a new shop in Fukuoka was just opened in 2023.
They deliver the barbering culture “MADE IN JAPAN” to the world through their pomade brand “BROSH” and educational activities. So many styles with fade they offer has been gathering attention from the world. Mr. Nishimori gives basic styles, fundamental method and skills necessary for Men’s haircuts to barbers and hairstylists all around Japan as an instructor at MIZUTANI Cut Academy.
They deliver the barbering culture “MADE IN JAPAN” to the world through their pomade brand “BROSH” and educational activities. So many styles with fade they offer has been gathering attention from the world. Mr. Nishimori gives basic styles, fundamental method and skills necessary for Men’s haircuts to barbers and hairstylists all around Japan as an instructor at MIZUTANI Cut Academy.
『The three elements that make up the style are Back Side, Weight, and Top. 』
Mr. Nishimori : 『It is important to cut at the point that follow the roundness of the head (vertical and horizontal). Unlike ladies' cut, men's cut line is reflected as it is. Until now, men's cuts were simply cut the length and there were not many cuts considering the roundness of the head. However, I think that men's cuts need to be cut with dots like sculptures. “ELEMENT” is very easy to handle because the blades length are short and ability to turn in a small radius.』
The compact design that enables accurate and efficient cutting, and the level-set type handle and reversible blades allow the hair flow and texture to be expressed as desired for each position.
Experience the pleasure of creating with your sensitivity and “ELEMENT” enhances and supports your originality.
The compact design that enables accurate and efficient cutting, and the level-set type handle and reversible blades allow the hair flow and texture to be expressed as desired for each position.
Experience the pleasure of creating with your sensitivity and “ELEMENT” enhances and supports your originality.
Elements that make up the style
- EXTRAMARISE
EXTRAMARISE® is a proprietary heat treatment ideally suited for haircutting scissors that was developed by MIZUTANI based on long years of accumulated data and experience. The same steel material can have totally different performance depending on the heat treatment used. Therefore, to maximize the special qualities of the rare metals (cobalt, molybdenum, vanadium, etc.) we’ve added to our products to the greatest extent possible, and achieve the ideal metal for scissors, (*hardening, tempering, sub-zero processing) and other complete temperature management procedures are essential. To bring out the distinct characteristics of materials, and manufacture a blade with the ultimate strength required for haircutting scissors, we at MIZUTANI have implemented our own proprietary heat treatment using the ideal temperature for scissors: EXTRAMARISE® processing.
- THRUST BALL BEARING
These are small, precision metal ball bearings with excellent axial load-bearing ability. Due to their design, which enables radial load-bearing as well, scissors open and close smoothly, which both lessens burden on the hands and contributes to a long cutting life. With anti-rust properties and durability as a matter of course, these bearings are a Japanese-made product.
- DISK DRIVER
Compact and easy to turn, this is a flat type driver for UFO screws. This screwdriver is included with all scissors with the mark shown.
* BLACK-SMITH® is registered trademark of MIZUTANI SCISSORS in Japan.
