ACRO CROSSOVER TSUCHIME ACT-1 MOMO

MIZUTANI’s ART CRAFT COLLECTION is a handmade craft collection produced by a lot of time and effort with our enormous passion for pursuing beauty of handmade crafts.
“TSUCHIME" is the one having exquisite modeling and dignified appearance produced by sophisticated and highly skilled craftsmanship. ACT-1 applies large size ring.

Size : 5.7INCH 6.2INCH 6.7INCH
Use : BLUNT
Material : Nano Powder Metal
* Make-to-Order
5.7INCHBlade length : 61mm
[Bottom blade] Ring size:horizontally/18.5mm・vertically/21mm
[Top blade] Ring size:horizontally/18mm・vertically/18.5mm
Product number : #104523
6.2INCHBlade length : 72mm
[Bottom blade] Ring size:horizontally/18.5mm・vertically/21mm
[Top blade] Ring size:horizontally/18mm・vertically/18.5mm
Product number : #104524
6.7INCHBlade length : 84mm
[Bottom blade] Ring size:horizontally/18.5mm・vertically/21mm
[Top blade] Ring size:horizontally/18mm・vertically/18.5mm
Product number : #104525

TSUCHIMETSUCHIME

アートクラフトコレクション
“Tools to enrich daily work”
MIZUTANI’s ART CRAFT COLLECTION is a handmade craft collection produced by a lot of time and effort with our enormous passion for pursuing beauty of handmade crafts comes from our desire “Further enrich daily work of cutting hair”.
“TSUCHIME” is the one having exquisite modeling and dignified appearance produced by sophisticated and highly skilled craftsmanship.
TSUCHIME
ACRO CROSSOVER - TSUCHIME -
ACRO CROSSOVER - TSUCHIME -
Color : KOGANE
ACRO CROSSOVER - TSUCHIME -
ACRO CROSSOVER - TSUCHIME -
Color : MOMO
Hard titanium coating
MIZUTANI's Hard titanium coating applies titanium compound by a special method of coating after the surface preparation for each pair of scissors.
This coating is extremely hard and has excellent abrasion resistance, and it is not easily scratched and keeps its beautiful appearance for a long time.
槌目 TSUCHIME

2 types of handles to choose from

TSUCHIME has two different types handles for your preferable. TSUCHIME ACT-1 you can have free handling feeling like an even handles scissors, and TSUCHIME ACT-2 you can have suitable holding feeling for men’s hair cut.
ACT-1/ACT-2
*2 handle types are available for MOMO also.
Please note that it will take some time for delivery. ACRO CROSSOVER TSUCHIME is a handcrafted product which requires a lot of time and enormous effort to produce each pattern by sophisticated artisans' hand for each product.
Nano Powder Metal
The Scienced Nano Powder Metal
The Scienced Blades

Angle and the shape of the cutting edge
of the Nano Powder Metal

other maker
other maker
Nano Powder Metal
Nano Powder Metal
The Nano Powder Metal, with blades at a 30–35° sharp cutting edge angle (image, above right), makes it easy to cut into hair. Many inexpensive or conventional haircutting scissors use blades featuring a less-sharp cutting edge angle, between 40° and 80°, with a greater curvature radius of the edge. These scissors, in addition to a worn and less-tough cutting edge (image, above left), cause the blades to become blunt.
■Haircut scissors durability test
Haircut scissors durability test
■Source: Long-term trial report on haircutting scissors
*Scissors A and B are made from the same stainless steel as that used for high-quality knives. Source by Mr. Keisuke Kato

Cross-section of hair

other maker
other maker
Nano Powder Metal
Nano Powder Metal
An electron microscopic cross-section image of hair that was cut using the Nano Powder Metal reveals a very smooth cut surface (image, above right). It also shows that hair can be cut almost in a circular shape without becoming “mashed.” When cut using scissors made by another company, however, hair is mashed and cut in an oval shape. A cross-section of the hair shows a rough cut surface (image, left).
Dr. Kentaro Asakura, Engineering
Dr. Kentaro Asakura, Engineering
Department of Materials Engineering at the School of Engineering, The University of Tokyo
(Part-time instructor at the Tobu College of Medical Technology)
Nano Powder Metal
Nano Powder Metal
Our Nano Powder Metal®, made with the new HIP manufacturing method (Hot Isostatic Pressing), is steel fabricated from a fine powder at the nano level. The uniform-grained powder is hardened with high temperature and pressure tempering, essentially eliminating all filler and impurities, and this method is used in precision manufacturing items like Blu-ray disc molds, where high levels of purity are required. At MIZUTANI, in order to create the ideal hair-cutting scissors, we have conducted our own proprietary research with this material, and created scissors with blades that combine strength with a long cutting life and the ultimate sharpness.
BALL BEARING
BALL BEARING
These metal ball bearings are small, high precision items produced by a Japanese manufacturer. With superior anti-rust properties compared to foreign-made products, they have a high level of durability. By drastically reducing friction around the screws, they not only ensure smooth opening and closing of the scissors, lessening burdens on the hands, but also protect the edge from damage, contributing to long cutting life.
DISK DRIVER
DISK DRIVER
Compact and easy to turn, this is a flat type driver for UFO screws. This screwdriver is included with all scissors with the mark shown.
* ACRO® is registered trademark of MIZUTANI SCISSORS in Japan.
* Nano Powder Metal is registered trademark of MIZUTANI SCISSORS in Japan.